Quick Contact
  Apycom jQuery Menus
   
 
   
   
   
   
   Highly Proficient Team Members
 
   Testing of Each and Every Product
 
   Timely Deliveries
 
   Competitive Pricing
 
   Customers Satisfaction
 
  Products
     
   
  ...............................................................
   
  ...............................................................
   
  ...............................................................
   
  ...............................................................
   
  ...............................................................
   
  ...............................................................
 
  ...............................................................
   
  ...............................................................
   
 
 
 
 
 
 
 
    Diamond Wire Block Dressing Machine
 
 

 
  Diamond Wire Block Dressing Machine
 
Diamond Wire Block
 

This is the fixed plant for squaring the blocks of granite and other similar type of stone with diamond wire. After cutting has been started the machine can work without an operator since the down feed control is automatic and safety device will stop the machine in case of break of wire. The machine uses large flywheels thus reducing wire fatigue and allowing the wire to rotate on its own axis during cutting, this in turn prevents the diamond beads from developing an oval shape due to uneven wear. The hydraulic tensioning of wire prevent vibrations of wire thus increasing the accuracy of cutting. The rigidity of the structure together with the down feed control system and the absence of vibration allows the machine to produce surfaces of the maximum precision and planarity. There is possibility of using the diamond wire in length of 18,19 meter, thanks to the take up device on the tensioning flywheel. The machine can be operated on variable speeds as per the hardness of stone.

 
Option
 

● Revolving trolley.
● Cutting feed with A.C. Drive.
● Control of flywheel motor by means of A.C. Drive; this allows for slow starting and the possibility of matching the    linear speed of the wire to the type of material being cut.

  TECHNICAL SPECIFICATIONS
   
 
Main Motor 20HP
Feed Motor (up & down) 3HP (D.C)
Motor for Trolley 2 HP (D.C)
Length of Wire 18 mtrs.
Speed of Wire 24 mtrs./sec.
Tension Device HYDRAULIC
Cutting Position VERT.& HORZ. ( four side)
Cutting Speed 76 m.m./ minute 15'.Hour
Maximum Size 2000mm X 4300mm
Block Cutting (6.5' X 14')
   
   
                                                                All Rights Reserved @ Rajasthan Processors   Disclaimer    |   Terms & Conditions   |   Privacy Policy